Msg

enum Msg

Defined in Infrastructure/MsgQueueTypes.h:26

Emulator message.

Value	Description
NONE	Unclassified.
CONFIG	A configuration request has been carried out (the exception is attached if it failed).
POWER	The emulator has been powered on or off.
RUN	The emulator has entered ExecState::RUNNING.
PAUSE	The emulator has entered ExecState::PAUSED.
STEP	The emulator has stepped a single instruction.
EOL_REACHED	The emulator has been paused at the end of the current line.
EOF_REACHED	The emulator has been paused at the end of the current frame.
RESET	The emulator has been reset.
SHUTDOWN	The emulator has been shut down.
ABORT	The emulator requests the GUI to quit the app.
WARP	The emulator has entered or exited warp mode.
TRACK	The emulator has entered or exited track mode.
MUTE	The emulator has been muted or unmuted.
EASTER_EGG	The easter egg was triggered.
RSH_CLOSE	RetroShell has been closed.
RSH_UPDATE	RetroShell has generated new output.
RSH_SWITCH	RetroShell has switched to another console.
RSH_DEBUGGER	DEPRECATED: The RetroShell debugger has been opend or closed.
RSH_WAIT	Execution has peen postponed due to a wait command.
RSH_ERROR	Command execution has been aborted due to an error.
RSH_DONE	All pending commands have been executed.
GUARD_UPDATED	A guard list has been modified (value = GuardType).
BREAKPOINT_REACHED	A breakpoint has been reached.
WATCHPOINT_REACHED	A watchpoint has been reached.
CPU_JUMPED	The program counter has been modified manually.
CPU_JAMMED	The CPU has halted due to an illegal instruction.
VIDEO_FORMAT	The video format has changed (value = 0 for PAL, 1 for NTSC).
SER_BUSY	The IEC bus is transferring data.
SER_IDLE	The IEC bus has returned to idle state.
MON_SETTING	The monitor configuration has changed.
DRIVE_CONNECT	A floppy drive has been connected or disconnected.
DRIVE_POWER	The emulator has been powered on.
DRIVE_POWER_SAVE	Fast paths have been enabled or disabled.
DRIVE_READ	The floopy drive has switched to read mode.
DRIVE_WRITE	The floppy drive has switched to write mode.
DRIVE_LED	The green drive LED has switched on or off.
DRIVE_MOTOR	The disk has started or stopped spinning.
DRIVE_STEP	The drive head has stepped.
DISK_INSERT	A disk has been inserted (carries the exception if it failed).
DISK_EJECT	A disk has been ejected.
DISK_PROTECTED	The write protection status has changed.
DISK_MODIFIED	The disk needs saving.
FILE_FLASHED	A file has been flashed into memory (carries the exception if it failed).
VC1530_CONNECT	A datasette has been connected or disconnected.
VC1530_TAPE	A tape has been inserted or ejected (carries the exception if inserting failed).
VC1530_PLAY	The play key has been pressed.
VC1530_MOTOR	The drive motor has started or stopped.
VC1530_COUNTER	The tape counter has stepped.
CRT_ATTACHED	A cartridge has been plugged into the expansion port (carries the exception if it failed).
KB_PRESS	A key has been pressed.
KB_RELEASE	A key has been released.
KB_LOCK	A key has been locked.
KB_UNLOCK	A key has been unlocked.
SHAKING	A shaking mouse has been detected.
ROM_LOADED	A ROM has been loaded (value = RomType, or -1 if unknown; carries the exception if it failed).
SNAPSHOT_TAKEN	A snapshot has been taken.
SNAPSHOT_RESTORED	A snapshot has been restored (carries the exception if it failed).
SNAPSHOT_SAVED	A snapshot has been saved (carries the exception if it failed).
WORKSPACE_LOADED	A workspace has been loaded.
WORKSPACE_SAVED	A workspace has been saved (carries the exception if it failed).
HIBERNATED	The machine has been hibernated (carries the exception if it failed).
QUEUE_FULL	The command queue is full and commands are dropped.
XRAY	The X-Ray debugger has been started or stopped.
ALARM	A user-set alarm event has fired.
RS232	RS232 activity (DEPRECATED).
RS232_IN	RS232 adapter has received data.
RS232_OUT	RS232 adapter has sent data.
SRV_STATE	A remote server has switched state.
SRV_RECEIVE	A remote server has received a packet (value = ServerType, value2 = sequence number).
SRV_SEND	A remote server has sent a packet (value = ServerType, value2 = sequence number).