Msg

enum Msg

Defined in Infrastructure/MsgQueueTypes.h:23

Message type.

Value	Description
NONE	No message.
CONFIG	A configuration request has been carried out (the exception is attached if it failed).
POWER	The emulator was switched on (value = 1) or off (value = 0).
RUN	The emulator started to run.
PAUSE	The emulator was paused.
STEP	The emulator completed a single step (string attached).
STOP	A remote debugger requested a stop.
RESET	A hard reset was performed.
SHUTDOWN	The emulator thread is about to terminate.
ABORT	The application is asked to terminate (value = exit code).
WARP	Warp mode was switched on (value = 1) or off (value = 0).
TRACK	Track mode was switched on (value = 1) or off (value = 0).
MUTE	The audio output was muted (value = 1) or unmuted (value = 0).
EASTER_EGG	The easter egg was triggered.
POWER_LED_ON	The power LED is on.
POWER_LED_DIM	The power LED is dimmed.
POWER_LED_OFF	The power LED is off.
RSH_CLOSE	RetroShell has been closed.
RSH_UPDATE	RetroShell has generated new output.
RSH_SWITCH	RetroShell has switched to another console.
RSH_WAIT	Execution has peen postponed due to a wait command.
RSH_ERROR	Command execution has been aborted due to an error.
RSH_DONE	All pending commands have been executed.
RSH_EXPORT	Data has been exported to the file system.
VIDEO_FORMAT	The video format has changed (value = PAL or NTSC).
OVERCLOCKING	The CPU overclocking factor has changed (value = factor).
GUARD_UPDATED	A guard list has been modified (value = GuardType).
BREAKPOINT_REACHED	A CPU breakpoint was reached (cpu.pc = address).
WATCHPOINT_REACHED	A CPU watchpoint was reached (cpu.pc = watched address).
CATCHPOINT_REACHED	A CPU catchpoint was reached (cpu.pc = program counter, cpu.vector = vector).
SWTRAP_REACHED	A software trap was reached (cpu.pc = program counter).
CPU_HALT	The CPU has halted.
EOL_REACHED	The end of a raster line was reached (string attached).
EOF_REACHED	The end of a frame was reached (string attached).
BEAMTRAP_REACHED	A beamtrap was reached (beam.v, beam.h = beam position).
COPPERBP_REACHED	A Copper breakpoint was reached (cpu.pc = Copper address).
COPPERWP_REACHED	A Copper watchpoint was reached (cpu.pc = watched address).
VIEWPORT	The visible region of the texture has changed (viewport = coordinates).
AUDBUF_UNDERFLOW	The audio buffer ran empty (value = milliseconds since the previous underflow).
AUDBUF_OVERFLOW	The audio buffer ran full (value = milliseconds since the previous overflow).
MEM_LAYOUT	The memory layout (bank mapping) has changed.
DRIVE_CONNECT	A floppy drive was connected or disconnected (drive.nr = drive, drive.value = connected).
DRIVE_SELECT	A floppy drive was selected (value = drive).
DRIVE_READ	A floppy drive is reading (value = drive).
DRIVE_WRITE	A floppy drive is writing (value = drive).
DRIVE_LED	The LED of a floppy drive changed (drive.nr = drive, drive.value = on or off).
DRIVE_MOTOR	The motor of a floppy drive changed (drive.nr = drive, drive.value = on or off).
DRIVE_STEP	A floppy drive moved its head (drive.nr = drive, drive.value = cylinder, drive.volume, drive.pan).
DRIVE_POLL	A floppy drive without a disk moved its head to poll for one (same payload as DRIVE_STEP).
DISK_INSERT	A disk was inserted (drive.nr = drive, drive.volume, drive.pan; carries the exception if it failed).
DISK_EJECT	A disk was ejected (drive.nr = drive, drive.volume, drive.pan).
DISK_PROTECTED	The write protection of the disk changed (value = protected).
HDC_CONNECT	A hard drive controller was connected (drive.nr = drive).
HDC_STATE	The state of a hard drive controller changed (hdc.nr = drive, hdc.state).
HDR_ATTACH	A hard drive has been attached (value: drive; carries the exception if it failed).
HDR_IMPORTED	A folder has been imported (value: drive; carries the exception if it failed).
HDR_DETACH	A hard drive was detached (value = drive).
HDR_STEP	A hard drive moved its head (drive.nr = drive, drive.value = cylinder, drive.volume, drive.pan).
HDR_READ	A hard drive is reading.
HDR_WRITE	A hard drive is writing.
HDR_IDLE	A hard drive became idle (value = drive).
MON_SETTING	A monitor setting has changed (value = option, value2 = new value).
CTRL_AMIGA_AMIGA	The reset key combination (Ctrl + both Amiga keys) was pressed.
KB_PRESS	A key has been pressed.
KB_RELEASE	A key has been released.
KB_LOCK	A key has been locked.
KB_UNLOCK	A key has been unlocked.
SHAKING	The mouse was shaken.
SER_IN	Data arrived at the serial port while its log buffer was empty.
SER_OUT	Data was sent from the serial port while its log buffer was empty.
ROM_LOADED	A ROM was loaded (value = 0: Kickstart ROM, 1: extension ROM; carries the exception if it failed).
SNAPSHOT_TAKEN	An automatic snapshot was taken (snapshot.snapshot = heap object that the receiver must delete).
SNAPSHOT_RESTORED	A snapshot was restored (carries the exception if it failed).
SNAPSHOT_SAVED	A snapshot has been saved (carries the exception if it failed).
WORKSPACE_LOADED	A workspace was loaded.
WORKSPACE_SAVED	A workspace has been saved (carries the exception if it failed).
HIBERNATED	The machine has been hibernated (carries the exception if it failed).
QUEUE_FULL	The command queue is full and commands are dropped.
XRAY	The X-Ray mode has changed (value = mode).
SRV_STATE	A remote server changed its state (value = SrvState).
SRV_RECEIVE	A remote server received data (value = server, value2 = log entry, string = packet).
SRV_SEND	A remote server sent data (value = server, value2 = log entry, string = packet).
ALARM	A scheduled alarm went off (value = the payload given when the alarm was set).